CA120HZ is the high impedance version of the CA120, delivering 96W @ 70/100V line level, a technology which is especially suitable for long loudspeaker wire runs and/or an amount of loudspeaker units far beyond the 2 or 4 units typically connected to a low impedance amplifier. Under its tiny size, it features an amazing set of remote control features: serial RS-232 port, IR receiver and 0-10 VDC remote port. CA120HZ is an ideal solution in those audiovisual applications which require integration with external control devices: education classrooms, meeting rooms, multimedia presentations, retail shops, etc.
Features:
- 1 x 96W RMS @ 70 / 100V amplifier
- Universal external power supply
- AUTO STANDBY function: in the absence of an audio signal the unit automatically goes into STANDBY mode, minimising power consumption
- Lightweight, silent, high-performance amplifier (fan-free convection cooling)
- 1 switchable balanced mic / unbalanced line input, with high quality microphone preamplifier, phantom power supply, noise gate and “talkover” function or priority over the rest of input
- 2 stereo lines (unbalanced)
- 2-band independent tone control (Bass, Treble) for the microphone / line 3 and line 1&2 input connection.
- Auxiliary output for liaison with other amplifiers or external audio devices
- Local control by digital rotary knob (“encoder”)
- Remote control by infrared remote control
- Remote control by WPaVOL or WPaVOL-SR (0-10 VDC) wall panel
- RS-232 control port, compatible with EclerCOMM software (free) and control protocol CA-NET
- MUTE port to silence the entire unit by closing external contact
Applications:
- Retail
- Education
- Corporate
- Leisure
Remote port:
The RJ-45 REMOTE type connector allows the connection of a WpaVOL or WpaVOL-SR (control 0-10 VDC) wall control panel to adjust the general output volume and/or to select one of the five active work source modes (LINE 1, LINE 2, MIC, LINE 1 + MIC, LINE 2 + MIC). The connection is made by a standard CAT5 cable between the WpaVOL or WpaVOL-SR wall panel and the REMOTE CA40 connector.
General
- Amplifier type
- Compact amplifier, Power amplifier
Audio specification
- Amp channels
- 1
- Power/ch (70/100V)
- 96 W RMS @ 70/100V
- Distortion THD
- 0.09 %
- Frequency range Min
- 50 Hz
- Frequency range Max
- 30,000 Hz
- Signal-to-noise ratio
- 70 dB Line, MIC (Bal): >50dB
- Built-in DSP
- No
Connections
- Audio inputs
- 3,5mm tele x1 (L/R Line 2)
- Audio inputs
- 6,3mm tele x1 (Mono Line 3), combined with Euroblock mic / RCA
- Audio inputs
- Euroblock line x1 (Mono Line 3), combined with 6,3mm mic / RCA
- Audio inputs
- RCA x2 (L/R Line 1), (L/R Line 3, combined with mic)
- Audio outputs
- Euroblock spk. cable
- Audio outputs
- RCA x2 (L/R AUX Out) Mono only outputs (L+R summed in case of active stereo input)
- Bluetooth
- No
- Ethernet
- No
- WiFi
- No
- Control
- DIP-Switch on under side of amp for settings
- Control
- Front buttons
- Control
- PC software EclerCOMM software or CA-NET protocol
- Control
- RS-232
- Control
- WPa control panel Connect a WpaVOL or WpaVOL-SR (optional) for volumen and source control
Energy
- Power Supply
- External Power Supply. In: 100-240V @ 50-60Hz, Out: 24 VDC
- Cooling method
- Convection cooling
- Consumption Stand-by
- 2.5 W
- Consumption Typical
- 24 W
- Consumption Max
- 52 W
- Auto Standby function
- Yes
Dimensions and weight
- Width
- 160 mm
- Depth
- 325 mm
- Height
- 48 mm
- Net weight
- 2.92 kg
Additional information
- Installation
- Ceiling, Freestanding/Shelf, Table, Wall
- Included Accessories
- REVO-IR remote control, DC Power Adapter
- Warranty
- 5 years
Packaging info
- Packaging size
- 450 x 220 x 60 mm
- Packaging weight
- 3.80 kg
